ASIC / SoC Engineer Needed for position in Mendota Heights, MN

I am in need of some people to fill a 6 month contract with LSI Logic in Mendota Heights MN. I have a very workable rate. I am enclosing a job decription. Please if you can help me send a updated resume to mmathews@qanalysts.com

Q Analysts is looking for a ASIC/SoC Engineer for one of its clients located in Minneapolis, MN.

DUTIES:
*As an integral member of the customer design engineering team, the Customer Design Engineer provides technical support to the company's sales staff, customers and peers, on complex issues such as chip floor planning, place and route, timing analysis, signal integrity, test, and design verification.
*Uses wide ranging and in depth experience during analysis of situations or data that may require an in-depth evaluation of variable factors.
*Position incumbent will exercise judgment in selecting methods, techniques and evaluation criteria for obtaining results.
*DFT, Test Generation and Verification, Physical Design, Timing Closure, DRC/LVS.

SKILLS:
*5 + years of experience as a Customer Design Engineer or equivalent.
*Synopsys Tools and flow: ICC, DCT, VCS, Tetramax Mentor Fastscan
*Atrenta for Netlist/Schematic DRC -Mentor Calibre for Physical layout DRC/LVS primarily, Synopsys Hercules also.

EDUCATION:
*BS/MS Electrical or Computer Engineering

Thanks for your help!!

Marsha

Marsha Mathews in Salt Lake City, Utah said: I am in need of some people to fill a 6 month contract with LSI Logic in Mendota Heights MN. I have a very workable rate. I am enclosing a job decription. Please if you can help me send a updated resume to mmathews@qanalysts.com

Q Analysts is looking for a ASIC/SoC Engineer for one of its clients located in Minneapolis, MN.

DUTIES:
*As an integral member of the customer design engineering team, the Customer Design Engineer provides technical support to the company's sales staff, customers and peers, on complex issues such as chip floor planning, place and route, timing analysis, signal integrity, test, and design verification.
*Uses wide ranging and in depth experience during analysis of situations or data that may require an in-depth evaluation of variable factors.
*Position incumbent will exercise judgment in selecting methods, techniques and evaluation criteria for obtaining results.
*DFT, Test Generation and Verification, Physical Design, Timing Closure, DRC/LVS.

SKILLS:
*5 + years of experience as a Customer Design Engineer or equivalent.
*Synopsys Tools and flow: ICC, DCT, VCS, Tetramax Mentor Fastscan
*Atrenta for Netlist/Schematic DRC -Mentor Calibre for Physical layout DRC/LVS primarily, Synopsys Hercules also.

EDUCATION:
*BS/MS Electrical or Computer Engineering

Thanks for your help!!

Marsha

Hi,
I am interested in this job.I have the experience for physical design.
you can contact me on swethagudavalli@gmail.com

Thanks for letting me know. Most of the positions that I get in you must have at least 3 years of US experience. But I will keep your name in my Roladex.

Dear Marsha,

I am not sure if you are still looking to fill up this position. I am currently looking and am very much interested in this position.

I can send you my resume once I hear back from you.

Thank you
Tanveer