HEO Jobs

neb matt,
Send me your e-mail and I'll try and send you a better diagrahm

johnny collins in Charleston, West Virginia said: i am learning...that's how you learn by asking...but I sure do wish I was born all-knowing like you.

Hey im sorry if I hurt your feelings but dint they teach you the 1 to 1 rule about digging in school? Im not trying to pick on you but I feel bad for people that pay alot of money for training and they are getting the shaft. Everything I have learned was from watching listining or asking. I still learn alot every day just takes alot of time.

You got to remember something.There are a lot of guys out there with a lot more experience than you who are not working right now.When they see someone asking a question like that it really burns them.You didn't hurt my feelings,I gave you an answer that would simplify your problem.The simplest way to make a safe trench is to Bench each side of the trench about 2ft down from the top and about a buckets width wide on each side.You're really lucky to be working right now.A really good web site to go to is the OSHA site for "Competent Person".This will show you about sloping and benching a trench. Good luck.

I'm sorry neb matt,These threads were ment for that Collin guy from
Virginia.You know how to dig a safe trench,I know how to dig a safe trench.But it's clear as daylight he doesn't know how to dig a safe trench.

c jackson in Millersville, Missouri said: i own excavation company in ky . all equip cab and air . looking for finish grade dozer operator $15 per hour

Are U serious? better add at least another $10 to that figure..

Job Wanted - Heavy Equipment Operator in California. I have 18 years experience and willing to travel. Been looking for work here in Cali with no luck. Can run Backhoe, Excavator, Front End loader, Grader, skidsteers,etc set and read grade stakes. I search daily on all the sites, and keep sending resumes and in person at business's with no luck yet. Any help or leads are greatly appreciated.

Come to KY ????????????????????? Lots of work here!

We have actually sent resumes to AZ, NV, UT, TX, getting almost back to South/Northeast United States. I'll check for HEO positions on Indeed and some of the others. What are they paying on average out there? Cali is in pretty rough shape right now, and only seems to be getting worse. Have applied with KBR to go overseas.

Thanks

I am a skilled heavy equipment operator. I am willing to work anywhere at any time. Please read my profile. I am the hardest working and most determined person you will ever meet. I also have 8+ years experience in Bombardier Snowcats.

I am a competent bulldozer/excavator operator with a specialty in finish grade dozer operations(D6N, D6R 6-way)looking for work in Alberta. I would consider relocating if the right opportunity came up. I have over 3 years experience in
Oil Field Construction
Country Road Upgrading/building - Road grade/backslopes/ditch bottom
Reclamation (Oil lease put backs/road reclamation)
Farm/Residential Landscaping(topsoil contour finishing)
Email dsartzen@xplornet.com

"Im N.C.C.E.R.certified,I specialize in the excavator.I just graduated from ACT schooling out of Alabama.Im currently available for employment.Please contact.

I'm searching for paid training for heavy equipment operator. I don't want to travel too far from home, but I need something different, a regular job isn't paying my bills. I live in Cape Gir. Mo

just took 2 of 3 levels in HEO and cant seem to find a job.live in freeport IL.will take level 3 later after get more funds.rockford would be nice too.anyone know of any jobs around this area give me a shout at karinkeister@gmail.com. thanks

NAME: SUBHASH CHAND
Age : 48years
OCCUPATION:WHEEL LOADER OPERATOR
EXPERIENCE:ARCHERODAN(SAUDI CONDRECO LTD.)
STEVIN ROCK JOINT VENTURE
ALNABOODAH CIVIL ENGINEERING
ARCHO INTERNATIONAL
AL JABER AND PARTNERS – STILL WORKING

NAME: SUBHASH CHAND
Age : 48years
OCCUPATION:WHEEL LOADER OPERATOR
EXPERIENCE:ARCHERODAN(SAUDI CONDRECO LTD.)
STEVIN ROCK JOINT VENTURE
ALNABOODAH CIVIL ENGINEERING
ARCHO INTERNATIONAL
AL JABER AND PARTNERS – STILL WORKING .
SEEKING FORWARD TO WORK IN EUROPE AND AUSTRALIA PLZ SUGGEST SOME COMPANIES OR JOB OPPURTUNITIES

NAME: SUBHASH CHAND
Age : 48years
OCCUPATION:WHEEL LOADER OPERATOR
EXPERIENCE:ARCHERODAN(SAUDI CONDRECO LTD.)
STEVIN ROCK JOINT VENTURE
ALNABOODAH CIVIL ENGINEERING
ARCHO INTERNATIONAL
AL JABER AND PARTNERS 2006 – STILL WORKING
LICENSES OF INDIA AND DOHA QATAR VALID AND OF DUBAI EXPIRED
CERTIFICATE OF TUV

seeking forward to work in europe and australia

Good afternoon sir, I am shovel, dozer operator and i have experience of 18 years by working in dubai. sir i also have licence of dubai for last 14 years sir now i m in search of such job in canada plz suggest me the company to whom i will contact for such job.

johnny collins in Charleston, West Virginia said: I know exactly what you mean I paid dearly to attend a heavy equipment school in Alabama also. They had "job search assistance", what a joke!!! Some of their job leads were not even in business any more and all of the others either want you to relocate and work for $10 an hour or did not want to talk to you unless you had at least 3 or 4 years experience. I have a CDL and am a truck driver all the employers I talked to want me to drive a truck, something I have been trying to get away from for the past 5 years or so!! I call it the CDL Pleage. If I wanted to drive a damn truck, why would I pay $10,000 to go to school??? I think most employers look at heo school graduates as fools. Luckily I found a job driving an articulted dump truck and at the spare of the moment got shoved into and excavator as a had to case and proved myself. I have been there ever since...WITH NO HELP OR THANKS TO MY SCHOOL!!!

Must be Blake. I have had the same experience with F'en school . No help whatsoever. They feed you a bunch of crap about how this training will help you land a job. We are and were fools for paying to attend this rip-off. NCCER stands for National College Credit Education Something or other. They don't promise that you'll get a job, job assistance finding employers looking for help. A bunch of bull. Just spoke with the trainers from that school they all left. Ah well live and learn.

I am looking for a backhoe / hi-lift operator to work in Harrisonville about 1/2 hour from Kansas City. Job will last a couple of months 5 tens and most saturdays. I need someone local if possible and will pay $20 per hour. Must be qualified and ready to put some hours in or please do not reply. I need an operator immediately, if your qualified start tomorrow. NON UNION

greg@auraholdings.com

BARRY MOSER in Altavista, Virginia said: WELL THE PAY ISNT THAT BAD WICH IM USUALLY MAKE MORE BUT I LIVE IN VA IVE OPERATED ALL TYPES OF EQUIPMENT BUT MOSTLY DOZER EXCAVATOR AND MOTORGRADER BEEN A FOREMAN FOR 4 YRS NOW SO WHAT TYPE OF EQUIPMENT DO U HAVE

I am looking for a job in KY have experience in anything from farming to golf course construction. I need anything right now.

I have experience in everything from farming to golf course construction really looking to find something in KY but will consider FL.

OWN AN EXCAVATING BUISNESS IN FRANKLIN KY . LOOKING FOR OPERATORS WITH EXPERIENCE. EMAIL jacksonexcavating@gmail.com

I am looking to obtain a full time position as an entry-level/apprentice heavy equipment operator. I'm Certified to operate Loaders,Excavators,Backhoes,& Skid-steers. I also have basic knowledge of soils and relative compaction requirements. Grade reading/setting including transfer from hubs, slope stakes, cut/fill calculations, hand level, engineer's level and laser level. Site layout and differential leveling. Print reading including grading plan, site plans and plan/profile sheet. Utility hazards and advanced workplace safety. I would like to work in Eastern Kansas or Western Missouri. I am willing to travel if work requires it. Please contact me at Jason198403@gmail.com or Jason198403@hotmail.com
Thanks, Jason

CJ in Chattanooga, Tennessee said: Check out www.aerotek.com they are a pretty good company and are nationwide. They'll help get your hazwoper if you're interested and also check with www.workers.com in CA.

Stay away from Aerotek. Will sell a job just to make a quota. VERY misleading info.

I was considering going to a HEO shcool, but now it just sounds like a huge waste of money... thanks for the heads up.

I am NCCER certified backhoe operator looking for work. Will travel if pay is good.

i m shovel operator and crane operator.

Michael A. Null
Oak Hills, CA 92345
Phone: E-mail: manconstructioninc@yahoo.com

Summary: Seeking a postion as a bull dozer, wheel loader,back hoe,skid steer,skip loader operator,cdl,state certified,deep creek construction school,contracting school
Job Objective: CERTIFIED HEAVY EQUIPMENT OPERATOR, 4 years 7 months experience
CAT305C EXCAVATOR,CASE 580 HOE,SKID STEER,CAT570MPX SKIP LOADER, 1 year 6 months experience
DOZER, CAT963C TRACK LOADER,CAT DOZERD4K DOZER,CAT BACK HOE420E,JOHN DEER710 HOE, 3 years 6 months experience
Experience:
Job Title: Operator/Truck Driver
Employer: Dirt Works, Temecula,Ca
Dates: 09/08 to 05/10
Duties: wheel loader,back hoe,skid steer,semi,doubles,flat bed,truck and pup,bottom dumps.

Job Title: Backhoe/Truck Driver
Employer: Ampam Mechanical, Wilmington ,Ca
Dates: 09/07 to 09/08
Duties: mofit 53ft operate case back hoe,skid steer,wheel loader ,hoe,bobcat,forklift,mofet, pull back hoe cdl driver

Job Title: Truck Driver/Operator
Employer: Quixote Studios, Hollywood ca
Dates: 09/06 to 09/07
Duties: truck driver,carpenter,operator,skid steer,backhoe

Job Title: Backhoe/Concrete/Carpenter
Employer: Soto Const, San Pedro.Ca
Dates: 10/05 to 09/06
Duties: BACKHOE/TRUCK DRIVER/CARPENTER

Job Title: Operator/Carpenter
Employer: Kasten Const, Torrance, Ca
Dates: 01/98 to 10/05
Duties: bobcat,back hoe,carpentry,concrete

Skills: GRADE CHECK, CDL CLASS A, CERTIFIED RIGGER, BACKHOE, CERTIFIED OXY ACTEYLENE, EXCAVATION
Education: High School Diploma/General Contractor #862259
OSHA Hazardous Waste Site Operators Certificate
Confined Space and Competent Person Certificates
Certified Heavy Equipment Operator/ Fork Lift Safety Certification
CA Drivers
License Class: A (multiple axle truck)
Willing to relocate: Yes
Additional Comments: General contractor license# 862259
References: Available on request

----------------------------------------

I attended a 6 month course,then operated aD8 for 5 yrs,i have over 5000 hr on a loader,i have a class A,so you wont need any body to deliver equiptment.i,v also been on a watertanker,watertruck,im not afraid to get dirty what ever it takes to get the job done-e-mail ,citytee98@yahoo.com,thank you.

I am an Icelandic heavy machine opirator! I have worked most in excavation! I am looking for a job! no matter were! I relize that my english is a bit rusty and that some places it would take little time to adjust! but I am willing! I would rather find a job in a warm country than a cold one but if it´s not possible then ok!
can anyone help me get in touch with a company that is looking for personel?
I am a hard worker and I am used to long hours!
if someone can help please contact me on my e-mail address! bodvarsson@hotmail.com

im just finishing school her in kalowna and looking for work any where so if you hve a poistion for me i would like to start asap.Im good worker smooth and can get any jod asked to do i can do it been running heavy equipment for 9 years.I would like to help you get big in the jods world.please email me thanks Derrick

looking for work i have certificat to operate heavy equipment familer with different equipment willing to relocate

i have been operating for over 25 years i am very experianced in but not limited to dozers,skidsteers,track and backhoes,frontendloaders,articulated dumps,and graders. I am looking for full time employment preferably year round work