Tips for piping designer interviews.

Do you have any tips to help prepare for an upcoming piping designer interview?

Are there common interview questions that come up again and again?

Just stay positive and be interested in learning. It's a long road to become a senior piper

i am kiran working for bechtel since from 2000,if u have any queries u can directly mail to my mail id below..

interview deals with standards and procedure of a project how it works,and also the employeer looks type of candidate who his suitable for his project like if its power project he should be aware of 31.1,power equipment like turbine building,boiler,AQCS,equipment,tie-in packages,if its process 31.3 and pipe rack design,column piping,pump piping,compressor piping and how to preapre MTO,iso-checking,lots more to add so cal me on 09899096560 if u have any doubts.

Contact me with contact details
dyjicj@yahoo.com

Please provide some coures center for pds and pdms

thanks

rajesh

mech. engineer offshore onshre piping painet welding q.c project manger exper. 22 years

Host said: Do you have any tips to help prepare for an upcoming piping designer interview?

Are there common interview questions that come up again and again?

material chemical proportuons and mechanical prop. model test

ANANTH in Madras, India said: HELLO I HAD A PLAN TO JOIN PDS IN BIBRAIN, PLEAS TELL HOW IS THE TEACHING.. IT WOULD BE MORE HELP FUL FOE ME...

Looking for pds training contact careers@tranquilengg.com

hi! I'm Roy PDS engineer working in Saudi, and I would like to know if you already got the answers to your questions coz im having the same problems as yours.

can you please send me a copy of answers to your questions regarding the PDS interview related questions?

this is my email address alvinroy_10@yahoo.com

Thank you and your response is highly appreciated

want to know regarding pipe routing questions that will be asked.

i am attending a telephonic interview for bechtel, please give me some tips on how to prepare for the interview.

navin in Houston, Texas said: i am attending a telephonic interview for bechtel, please give me some tips on how to prepare for the interview.

going in for that big PDS job they have kicking off huh =P

this is pardeep ,would like to know best training centre for PDMS in india specially in new delhi.

sir,

deferent between pipe bend & pipe elbow

Host said: Do you have any tips to help prepare for an upcoming piping designer interview?

Are there common interview questions that come up again and again?

Question : what is the difference in Pipe and tube.
answer : pipe is a tube which dimensions are according to ASME 36.10M ( For Seamless or wrought steel pipes) or ASME 36.19M standards (for SS pipes).

KANDASWAMY in Doha, Qatar said: I THINK CHENNAI IN MECH-CAD
AND ARJUN CONSULTANT IN ADYAR CHENNAI

can u give me the contact information of ARJUN CONSULTANT

Hi
presently i am working in mechanical cad designer, now i want to change the piping designer , how to change the piping designer. my e mail adress is ragupathin2007@yahoo.com.sg Thank you.

navin in Houston, Texas said: want to know regarding pipe routing questions that will be asked.

Navin, I assist Bechtel with their Engineering needs both locally and nationally. Give me a call offline and I discuss with you some of their procedures.

Dennis 215-444-9495

Thanks
Pl. send me PDS Course Fees, New Batch & Hostel Facility
I am Mech. Draughtsman But i no knolage for Basic piping
u r teching basic Piping Pl. guid me
my english is very poor,,,,

Pl. i am intrested in PDS But above broblem

Pl. guid me...

sanjay-<contact information removed> (Mumbai)

i want tips for effective pipe routing in plant

I want to learn PDS course at hyderabad.plz told me best institute.some institutes are given training but not meet our requirements.so plz suggest best institute for pds....

request donot join IPEBS institutes in hyderabad, i lost my time and money, now i ll be searching new institue for piping design course..

PLZ TELL ME PDS TRAINING INSTITUTE IN HYDERABAD.SOME INSTITUTES IN HYDERABAD WITHOUT KNOWELEDGE OF "PDS" teach the pds course.I want any good institute for "PDS" or any experience person could teach "PDS" in hyderabd.plz send the address for those persons...

Host said: Do you have any tips to help prepare for an upcoming piping designer interview?

Are there common interview questions that come up again and again?

One that sometimes comes up and stumps a few Pipers is.....What can dictate actual location of some equipment?

Mark in Spring, Texas said: Just stay positive and be interested in learning. It's a long road to become a senior piper

can u tell me how to improve to become 4 good piper

to concentrate toward work and to work learn not for earn. to become agood pipe designer first need is good knowledge of all design software specially autocad

For piping design and engineering and PDMS ,IPEBS is one of the best institute in India, I have done my course form IPEBS Hyderabad, the course was delivered in an excellent fashion, and I am selected as Piping Engineer in Hyderabad, ARYA Systems.

I did my course in Piping Engineering from IPEBS hyderabad and got a job in ROLTA Mumbai as a Piping Designer . I recommend IPEBS for anyone looking forward to establish themselves in the Piping Industry.

there are many PDS trainers in chennai like bibrain, speartech, mechcicadd,Cethar

they are charging around 35-40K, for teh course

www.clickindia.com/detail.php?id=211957

see this for PDS and Sp3D training in chennai

Hi i am ananth, given me the address of speartech and cethar in chennai for PDS course. My mail id is chnanand@hotmail.com

i want to do mechanical engineering diploma in part-time or sat.&sun.can u guide me which institute recognised by aicte & his address & telephone nos.in mumbai,& i want to also learn pds,pdms.microstation so which institute in mumbai or any person who teach all the course,pls send me this information on my email id,i am working full time job(10am to 6pm).
Thanks!

We are always looking for piping designers/engineers here @ SIEMENS in Orlando, FL for our Power Generation DIV. If any of you are interested let me know. We use PDS here.

email me your resume.

send resume to <Edited by Host: contact info removed>

babu in Vijayawada, India said: request donot join IPEBS institutes in hyderabad, i lost my time and money, now i ll be searching new institue for piping design course..

Srinivas in Hyderabad, India said: For piping design and engineering and PDMS ,IPEBS is one of the best institute in India, I have done my course form IPEBS Hyderabad, the course was delivered in an excellent fashion, and I am selected as Piping Engineer in Hyderabad, ARYA Systems.

HI
As I can see from your postings, you have done the piping course at IPEBS. What will you have to say as per the proficiency you attained after the course. What are thier strengh and weakness as I saw a negative posting about them here asking people not to register with them. Your help will be well appreciated thanks

Baseer in Hyderabad, India said: I did my course in Piping Engineering from IPEBS hyderabad and got a job in ROLTA Mumbai as a Piping Designer . I recommend IPEBS for anyone looking forward to establish themselves in the Piping Industry.

HI
As I can see from your postings, you have done the piping course at IPEBS. What will you have to say as per the proficiency you attained after the course. What are thier strengh and weakness as I saw a negative posting about them here asking people not to register with them. Your help will be well appreciated thanks

ragupathi in Singapore, Singapore said: Hi
presently i am working in mechanical cad designer, now i want to change the piping designer , how to change the piping designer. my e mail adress is ragupathin2007@yahoo.com.sg Thank you.

Hi, i'm also interested on being a piping designer. if you got the answer, can you kindly send it to me. dinobescutin@yahoo.com

Brandon Halterman in Orlando, Florida said: We are always looking for piping designers/engineers here @ SIEMENS in Orlando, FL for our Power Generation DIV. If any of you are interested let me know. We use PDS here.

Hi, I am interested. I know PDS, SP3D and a bit of PDMS. Presently working as Piping 3D Coordinator in Japan. I hope to hear from you soon. My email is jmraabel@yahoo.com

thanks,

Arun Kumai, do you work for IPEBS
I can see your posting and that of IPEBS were done the same time, gues probably you are advertising for them , This is same thing with two postings earlier claiming to have gotten job in companies after thier trainings in IPEBS.
So tell us who you are really

Maybe all you guys are getting this wrong, here is a hint. This business is not for you. A level of expertise is needed. you guys are just willing to learn a machine and not the principles behind design or engineering. What you people design can cost people there lives. I suggest if you money grabbing mongrels have no idea about this trade, then you should let it be. You are only intrested becoauseof the industry boom hence the sudden need to learn piping. I suggest you keep clear, as not only do you make a bad name for those indian proffessionals that have followed the correct route, your are also effecting the business ona whole.

You know, I'm a little sick of all these non-U.S. posters trying to grab jobs here in America. Stop spamming the board. Read the rules and abide by them. This continual leveraging to take jobs and get into our workforce on visas is what is at the root of resentment towards you folks. Why not stay home and build your own economy up? Hundreds of thousands of Americans have been laid off in the last few years, our unemployment is on the rise and we're feeling it badly. The last thing we need is competition for scarce jobs from people who barely speak the language and come here to work for half the pay, then turn around and take everything they learned back to their native country to further compete against Americans.

Our country worked hard to get where it's at. You stay home and do the same please.

xcuse robert u r being nasty, religinus on professional forum bak off mate

His not being nasty he is voicing his opinion. You can feel free to vent your anger too if you think he is being nasty. He put his opinion in a politically correct manner, and if your not educated enough to see that, then obviously shows what he was trying to say was correct. Robert in reply to your point, I do feel the notion of stay home and build your economy, I think you will find that the business that you work in is fuelled by projects and economy that are not American. In principle I see what your trying to say.

co in Birmingham, United Kingdom said: Hi Babu,
What is wrong with IPEBS , am planning to be there nexth month for their Piping Training.
Thanks

What is wrong with IPEBS , am planning to be there nexth month for their Piping Training.
Thanks

I am working in refinery as operator, i wish to make my career in piping design, whether it is possible for me, if so where it is good for me, about IPEBS some say it not worthy , pls help me out

i AM A MECHANICAL ENGINEER AND PRESENTLY WORKING AS A PIPING ENGINEER IN ONE EPC COPMANY. I WISH TO DO PDMS COURSE WITHIN ONE WEEK. IF ANYBODY CAN HELP ME PLEASE CONTACT TO MY MAIL ID-aniljacob27@gmail.com