Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.
About the Position:
This position is located in the Soils B Section, Geotechnical Engineering and Sciences Branch, Engineering Division, Omaha District, US Army Corps of Engineers. The office is located in downtown Omaha, NE, near the Missouri River and the city's wide array of parks, museums, historic sites, restaurants, and entertainment venues.
Who May Apply: US Citizens
- Permanent Change of Station (PCS) allowances may be authorized
- TDY travel will be required up to 20% of the time
Serves as a Senior Geotechnical Engineering Specialist responsible for performing a wide variety of geotechnical designs and or studies in support of the Civil, Military and Hazardous, Toxic and Radiological Waste (HTRW) Programs within the District. Serves as Dam and levee Safety Project Engineer responsible for the inspection and evaluation of the Corps of Engineers dams and levees within the Omaha District. Serves as the Lead or Project Engineer for multi-disciplined teams assembled to accomplish Civil, Military and HTRW Projects.
Specialized experience: To Qualify applicants must possess one year of specialized experience equivalent to the next lower grade/level ([GS-11). Specialized experience is defined as: application of priniciples of geotechnical engineering concepts to dam and levee safety projects and performance of geotechnical analysis in support of dam and levee repair and construction.
You will be evaluated on the basis of your level of competency (knowledge, skills, abilities)in the following areas:
- Knowledge of geotechnical engineering concepts
- Knowldege of dam and levee safety programs
- Ability to managem and coordinate multi-disciplined teams
- Skill in written and oral communication
Education cannot be substituted in lieu of specialized experience for this position at the GS-12 level.
The 0800 occupational series has specific educational requirements which apply to all positions. From the options below, select the one statement which describes your educational background. Education above the high school level must have been completed in a U.S. college, university, or other educational institution that has been accredited by one of the accrediting agencies or associations recognized by the Secretary, U.S. Department of Education. Transcripts are required at the time of application .
A. I have a degree in professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions
Only degrees from an accredited college or university recognized by the Department of Education are acceptable to meet positive education requirements or to substitute education for experience. For additional information, please go to the Office of Personnel Management (OPM) and U.S. Department of Education websites at - http://www.opm.gov/qualifications and http://www.ed.gov/admins/finaid/accred/index.html
Foreign education must be evaluated for U.S. equivalency in order to be considered for this position. Please include this information in your resume.
Click here for more information.
Male applicants born after December 31, 1959 must complete a Pre-Employment Certification Statement for Selective Service Registration.
You will be required to provide proof of U.S. Citizenship.
One year trial/probationary period may be required.
Direct Deposit of Pay is Required.
Personnel security investigation is required.
HOW YOU WILL BE EVALUATED:
Your application package (resume, supporting documents, and responses to the questionnaire) will be reviewed to verify that you meet the basic eligibility and qualification requirements. Your responses to the q uestionnaire will be used to evaluate your relevant personal, educational, and work experiences. Only the most recently submitted resume will be considered.
Basis for Rating : Qualified candidates will be assigned to one of three quality categories: Best Qualified, Highly Qualified and Qualified. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.
Interagency Career Transition Assistance Program (ICTAP). The Interagency Career Transition Assistance Plan (ICTAP) provides eligible displaced Federal competitive service employees with selection priority over other candidates for competitive service vacancies. If your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority if: 1) this vacancy is within your ICTAP eligibility, 2) you apply under the instructions in this announcement, and 3) you are found well-qualified for this vacancy. Well-qualified is defined as meeting all of the minimum qualification standards and eligibility requirements as well as possessing skills that clearly exceed the minimum qualification requirements for the position. Under competitive delegated examining, an ICTAP eligible will be considered well-qualified if they attain an eligibility rating of 90 or higher, not including points for veterans' preference. You must provide proof of eligibility with your application to receive selection priority. Such proof may include a copy of your written notification of ICTAP eligibility or a copy of your separation personnel action form. Information about ICTAP eligibility is on OPM's Career Transition Resources website at http://www.opm.gov/ctap/index.asp .
The Department of Defense offers excellent benefits programs some of which may include:
Comprehensive health and life insurance
Generous retirement programs
Paid holidays, sick leave, and vacation time
Flexible work environment to include use of Telework and alternate work schedules
Paid employment related training and education
Possible student loan repayment
Payment of licenses, certification, and academic degrees as applicable
Bonuses, incentives, and awards as appropriate for the job.
This position is Career Program 18.
Salary includes applicable locaity pay.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
The Department of Defense (DoD) policy on employment of annuitants will be used in determining eligibility of annuitants. The DoD policy is available at http://www.cpms.osd.mil/ASSETS/E8AB932EA1E44617BAC7222922E42A62/DoDI140025-V300.pdf .
In accordance with section 9902(h) of title 5, United States Code, annuitants reemployed in the Department of Defense shall receive full annuity and salary upon appointment. They shall not be eligible for retirement contributions, participation in the Thrift Savings Plan, or a supplemental or redetermined annuity for the reemployment period. Discontinued service retirement annuitants (i.e. retired under section 8336(d)(1) or 8416(b)(1)(A) of title 5, United States Code) appointed to the Department of Defense may elect to be subject to retirement provisions of the new appointment as appropriate. (See DoD instructions 1400.25, Volume 300, at http://www.dtic.mil/whs/directives .)
Multiple positions may be filled from this announcement.
Credit will be given for appropriate unpaid work experience.
Further certification from this announcement may take place up to 90 days beyond the closing date of this announcement.
usajobs.gov - 18 months ago
The Army is a key component of the U.S. Armed Forces, providing expeditionary land forces wherever and whenever they are required. Working...