Sets up and operates power brake to bend, notch, punch, form rolls, arc, or straighten metal plates or sheet metal and structural shapes to controlled document specifications by performing the following duties.
Selects, positions, and aligns dies in machine ram and bed according to knowledge and previous experience.
Turns adjustment screws to set specified pressure of ram and clearance between dies to thickness of metal, as indicated by calibrated scale or feelers.
Lays out or details layout on work stock from controlled documents.
Positions workpiece manually to align edges to dies and backguage.
Starts machine and depresses pedal to activate ram that bends metal.
Sets stops on machine bed and repositions stock to run successive pieces, or to perform multiple operations.
Verifies dimensions of workpiece with controlled documents.
Other duties may be assigned.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations with other employees of the organization.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and depth perception.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment requires the use of earplugs. Workplace safety is a primary concern and it requires employee to maintain good housekeeping.
How To Apply
If you are open to pursuing this time sensitive opportunity, please complete an application online by clicking "APPLY NOW." To begin your application, we recommend that you either copy and paste your resume or upload your resume. This process takes approximately 5 minutes to complete. If you do not have a resume to upload, you may build a resume online; this option may take up to 20 minutes to complete. Thank you for your interest in our company.
SPX is an EOE
SPX is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, gender, age, disability, protected veteran status, or any other reason prohibited by law.
SPX - 8 months ago
copy to clipboard
SPX Corp. controls the ebb and flow of multiple industries. The company operates from four units: Flow Technology (pumps, valves, other...