SERVICE TECHNICIAN
Clean Energy - United States

This job posting is no longer available on Clean Energy. Find similar jobs: Service Technician jobs - Clean Energy jobs

To be successful in the role of Service Technician, you will have:
  • A high school diploma or GED equivalent.
  • A minimum of 2-5 years of related experience, or an equivalent combination of education and experience.
  • PLC experience with demonstrated ability a plus. Quick question for you - click here

    Within the last 5 years, what role did the following play in your job?
    PLC Troubleshooting
    Major component of my job all or most of the time Major component of my job occasionally Moderate component of my job all or most of the time Moderate component of my job occasionally Minor component of my job all or most of the time Minor component of my job occasionally Formerly a major component of my job Formerly a minor component of my job Familiarity, but never a component of my job No real familiarity

    Comment:

    (Your answer will automatically be saved when you submit your application)
  • Well developed electrical and mechanical abilities and a strong understanding of how things work together.
  • The practiced skill of diagnosing and repairing mechanical problems on high pressure gas/air systems a plus.
  • The demonstrated ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic.
  • The skill to monitor, check and correct phase imbalances, current draw, low voltage power supplies, pressure transmitters, relay logic and programmable logic control operation.
  • A commitment to working safely with high pressure gases and electrical components
  • Your own tools, a well developed professional style set 1 ½" and less wrenches/sockets/Allen wrenches/pliers/pipe wrench/large adjustable wrench, etc. A tool allowance can be used to purchase larger or non-standard tools.
  • Basic knowledge of Microsoft Office applications.
  • A solid DMV record with no moving violations.
  • The ability to be on call 24/7. You will need to hit response times (specified by contract) 100% of the time. There may be the requirement to work overtime on an emergency basis.
  • A home neighborhood/environment safe and secure enough to park a fully stocked company truck.
Key competencies:
  • Interpersonal and customer service skills -- the talent to effectively interact with customers, acting as a strong representative for Clean Energy, building client relationships, and responding to requests in a timely and appropriate manner.
  • Client communication abilities -- the skill and talent to take highly technical information, translate it then present it to customers in easily understandable terms.
  • Language and communication skills -- the ability to read and comprehend simple instructions, short correspondence and memos, write simple correspondence, and effectively present information in one-on-one and small group situations to customers, clients, and other Clean Energy employees.
  • Mathematical skills and reasoning abilities -- the skill to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; to compute rate, ratio, and percent and draw and interpret bar graphs. You'll need to apply common sense understanding to carry out detailed written or oral instructions and deal with problems involving a few concrete variables in standardized situations.

The Role As Service Technician, you will inspect, maintain and repair the fueling equipment and ensure an aesthetically pleasing appearance for each of your assigned stations. You will travel from site to site, generally an hour and a half from your home base and/or each other, doing equipment and control maintenance and creating positive customer relations that promote Clean Energy. For example, you might travel to one, two, or even three stations per day, making sure safety interlocks for shut-down systems are working properly or automatically rebuilding compressors after 5000 hours of use. Quick question for you - click here

Topic: Which best describes your experience with mechanical maintenance on equipment. (Compressors and/or Industrial Equipment)
0-2 years of experience 2-5 years of experience 6-10 years of experience 10+ years of experience

Comment:

(Your answer will automatically be saved when you submit your application)
You'll get to know the customer, checking in upon arrival, and building a line of open communication. You might meet with the phone company to repair or install a line, or take time to paint or clean the site. These are your stations to monitor and you will take responsibility for their overall care, with the lion's share of your duties being control and mechanical maintenance. For this route, you will hold responsibility for 5 stations, and you'll support the other Technicians throughout New York and Long Island as needed. The frequency with which you'll visit each will depend upon size and volume. We strive to work a 40 hour week, but occasional overtime could be required.

You will have a handheld computer with GPS and scanner that begins at departure at the beginning of your day (less a commute time calculation) and is scanned at each destination. Throughout your day you will travel from site to site performing your duties. As a Service Tech, in addition to your personal duties, you might be called to help a lesser trained Service Tech or find that you cover a greater distance during your "on call" week. Some calls will be short, while others, rebuilding a compressor for example, will take a longer.

Specifically you will:
  • Make periodic inspections of fueling locations and equipment to determine that proper and normal operating conditions are being met.
  • Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
  • Install, remove and modify fueling locations and equipment.
  • Maintain all fueling related equipment and structures in accordance with manufactures and Clean Energy guidelines.
  • Clean and maintain fueling locations by picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing fueling equipment, and painting and maintaining the canopy, lot, islands, and surrounding landscaping in and outside of enclosures.
  • Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
  • Inspect, maintain, adjust, repair or replace electrical equipment including electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters and controls for safe and proper operating condition.
  • Inspect, maintain, adjust, repair or replace mechanical equipment such as compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
Note: this description is intended to give you a general overview of the position and is not an exhaustive listing of duties and responsibilities.

Clean Energy - 17 months ago - save job - block
Recommended Jobs
SEM Process Technician III - (T3)
Applied Materials Inc. - Santa Clara, CA
Applied Materials Inc. - 1 day ago

Electronics Technician III
University of Missouri - Kansas City - Kansas City, MO
University of Missouri - Kansas City - 2 days ago

ELECTRONIC TECHNICIAN III
JT3 LLC - Edwards AFB, CA
JT3 - 2 days ago
About this company
11 reviews