Test and Measurement Technician
Maxim Integrated Products - Beaverton, OR

This job posting is no longer available on Maxim Integrated. Find similar jobs: Test Measurement Technician jobs - Maxim Integrated Products jobs

As a Measurement Test Technician, you will work with computer programs to acquire analog measurement data from various semiconductor parameter analyzers.

Necessary minimum experience:
- 2 years using at least one of the following hardware: Agilent B1500, 4156, or 5270 Semiconductor parameter analyzers.
- 2 years using at least one of the following software: Agilent’s IC-CAP or National Instruments’ LabView; specifically with using the equipment above to take measurements on individual semiconductors.
- Demonstrate ability to perform measurements using a combination of the hardware and software listed above.
- 2 years experience using a wafer prober, preferably semi-automatic.
- Good understanding of the operation of Bipolar, CMOS, and HBT devices.
- Ability to calibrate and measure using a Vector Network Analyzer.
- Proficiency with using bench test instruments to perform measurements and circuit debugging.


- This position is open for candidate with 2 -5 years of industry experience, in the field of test and measurement of semiconductor parameters, both DC and AC.
- The candidate must demonstrate a working knowledge of semiconductor devices; specifically Bipolar, HBT, and CMOS transistors. He must demonstrate the ability to create test programs in IC-CAP, LabView or similar test executive program to control one of the following semiconductor parameter analyzers: Agilent E5270, B1500, or 4156B.
- They must also be able to operate a wafer prober and incorporate programming the wafer prober into his test programs.
- They must be able to calibrate measure S-parameters of active devices using a Vector Network Analyzer and bias supplies.
- The familiarity with the following is considered a plus, but not a replacement of the said requirements:
- Use of spectrum analyzers, digital storage oscilloscopes, handheld multi-meters, impedance analyzers and expertise in exporting data from all instruments into report formats suitable to use by engineers.

Maxim is an EEO/AA Employer

Maxim Integrated - 23 months ago - save job
Recommended Jobs
Electronics Technician
Synergy Seven - Hillsboro, OR
Synergy Seven - 30+ days ago

Ophthalmic Technician 1
Oregon Health & Science University - Portland, OR
Oregon Health & Science University - 5 days ago

Calibration Technician IV - Beaverton, OR
Tektronix - Beaverton, OR
Danaher - 26 days ago
About this company
51 reviews
Maxim Integrated is a highly successful, $2.4 billion company. With offices and manufacturing sites around the world, we design...