E Byrd
Houston, TX
To obtain a challenging, responsible position as an Electronic Technician where my past experience, education, and demonstrated skills can be effectively utilized.
PROFICIENCIES, TECHNICAL SKILLS AND TRAINING:
• - Significant, long term experience in testing, documentation, repair, maintenance, and calibration of electronic equipment.
• - Extensive experience preparing and running tests on Takaya Automated Test systems.
• Experience in designing and programming using National Instruments LabWindowsCVI
• Completed the Schlumberger course on the LITE Test System.
• Proficient in Excel, Word, SPDM and ACAD LT.
Work Experience
Electro-mechanical Tech
July 2009 to January 2012
Worked in Downhole Testing and in RTD departments. Have handled small radioactive sources while building the Bore-Hole Properties Tool (BHPT), and most recently performed as the main technician building the Fluid Identification density tool (FLID).
Electronic Technician
September 1999 to June 2009
Worked producing IFlex toolstring. Previously worked in the Board Test Lab developing and running Takaya Test System tests, Lite functional tests, and self determined meter checks as necessary for troubleshooting purposes on individual circuit boards. Was previously programming automated production tests for SMACs circuit boards using NI LabWindows software. Have helped set up Powerdrive test stations locally at Houston SigmaTech, plus have traveled to set up test stations at both Stonehouse Production Center in England and Tronico in France. Have worked transferring the Camco Powerdrive from English database into SPDM, primary testing of Powedrive electronics prior to shipment overseas.
Electronic Technician
February 1999 to September 1999
Assisted in the set up of the facility for the Joint Industries Project, Phase Two testing. Duties included installation and wiring of sensors and control circuits to electronic interface modules for computer control and monitoring.
Electronic Technician
February 1994 to May 1998
Experience in the Advanced Drilling Systems Department working as RWOB-Sustaining, GST-Sustaining, and VIPER development doing prototyping, troubleshooting, and documentation, with light work using Protel Schematic and PCB.
Electro-mechanical Assembler
September 1990 to September 1992
Experience manufacturing downhole logging equipment and accessories. Did primary building on acoustic receivers on 1670, 1680, and prototype 1668 systems.
Electro-mechanical Assembler
November 1989 to February 1991
Computer assembly/testing.
Sergeant E-4
April 1984 to February 1989
Security Clearance: Secret
Position: Avionics Inertial Navigation Systems Specialist
Education
Computer Engineering Technology
1991 to 1997
Bio-Chemistry
1980 to 1983
