To analyze and correct electrical problems and repair and overhaul electrical equipment and controls.
Plan details of working procedure by determining replacement needs or new material required and develops a logical approach to correct the problem.
Analyze circuits, wiring diagrams and drawings to install, repair, calibrate, service or replace electronic devices and systems.
Receive wiring diagrams, specifications and instructions from supervisor covering emergency and scheduled repairs, installation, and electrical inspection work to be performed.
Perform work requiring a thorough knowledge of electrical theory and principles, statutory codes, properties of materials and principles of operation of electrical equipment. Starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with 0SHA/MSHA requirements.
Service electronic equipment by checking, testing, and replacing faulty components, circuits, printed circuit boards, and similar electronic devices.
Install, repair, and maintain communication cables, power distribution cables, then splicing pieces as required.
Fabricate parts if not commercially available, using machine and hand tools common to the trade.
Determine need for, analyzes, and makes necessary running adjustments, repairs, and overhauls.
Advise and cautions operators and mechanics about potential electrical problems and inherent dangers involved.
Notify supervisor of potentially dangerous electrical equipment noted and corrective action taken.
May be part of a mechanical team on major installations, working with other trades such as machinist, pipefitter, millwright etc.
On night shifts and weekends may be called on to do temporary repairs in millwright or pipefitter work.
Rotate as member of plant safety audit team inspecting for electrical problems.
EDUCATION, EXPERIENCE AND KNOWLEDGE:
Must have 5 years of three-phase experience and experience with PLC.
Ability to conduct ground continuity and earth resistance tests.
Ability to climb in overhead structures, to work beneath machines and in close quarters performing analysis and repair work.
Willingness to work in outdoor environment in all conditions.
Meets company's substance abuse testing requirements; as a safety sensitive person, may be subject to random substance abuse checks.
High degree of precision working with minimum tolerances required. High degree of attention and care required to prevent injury to others when responsible for flow of electrical power. Exposed to high voltage electricity.
Strong safety leader including excellent compliance in MSHA and OSHA safety standards.
Quarry, Asphalt, or Concrete plant experience a plus.
Must be a self-starter.
Licensed electrician preferred.
Rogers Group, Inc. is An Equal Opportunity Employer - Minorities/Females/Veterans/Disabled are Encouraged to Apply