FUNCTIONS AND RESPONSIBILITIES:|
Penetrant Technician Trainees are required to be active participants in the training program for the Non Destructive Testing (NDT) method of Penetrant Testing (PT) as controlled by NAS 410 and PCC Procedure RI 4.1.
Trainees gain work experience in PT under the direct observation of a certified Level 2 or Level 3 in PT, or, a certified Level 1 or NDT instructor only when approved by the Responsible Level 3.
The trainee follows established procedures and part specific technique cards to:
Rack parts in applicable baskets taking care to prevent pooling of penetrant in part geometries that can cause pooling
Immerse parts in the penetrant solution then wash off residual penetrant after appropriate dwell time has been met being careful not to over-wash the parts
Place parts in the drying oven ensuring that water is not allowed to pool in the parts
Apply developer powder after the drying operation is complete
Report faulty operations, defective material or solutions, and report these and any unusual conditions to proper supervision.
Maintain clean and orderly work areas.
Perform related duties, as assigned by supervision.
Must know and follow all departmental and company safety rules.
Use simple arithmetic including decimals and fractions as needed.
Must have the ability to read and work from established procedures, specifications, formulas, charts, tables, drawings, similar information.
Precision Castparts Corp. - 13 months ago
Precision Castparts Corp. is a worldwide, diversified manufacturer of complex metal components and products. It serves the aerospace, power...