ROLE/ JOB SUMMARY:|
This position is responsible to ensure that the requirements of API 510 and 570 on inspection, examination, and testing are met, and shall be directly involved in the inspection activities. Responsible for overseeing the quality assurance/quality control on behalf of REC Silicon.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform internal and external inspections to determine if a weldment or equipment meets the acceptance criteria of a specific code, standard or document.
Conduct inspections on equipment at scheduled intervals to maintain the mechanical integrity of the fixed equipment of the facility.
Properly interpret regulations, codes and industry standards.
Compile and submit completed inspection report in a timely manner.
Pay attention to detail and be capable of recommending and approving repairs as well as performing visual inspection of completed work.
Study equipment leak regulations applicable to location and customer base.
Cooperate with personnel of the Maintenance & Engineering Department on problems of scheduling, methods of repair, materials utilization and in arranging special inspection and advice on inspection requirements, corrosion allowances, access provisions, etc. for new designs.
Request the services of the Materials Scientist and the Reliability Engineer for Fixed Equipment on critical or unusual problems involving the cause, seriousness, and prevention of corrosion or other deterioration of plant equipment, and also on development of inspection methods.
Will submit Reports of Inspections within ten (10) days of inspection to the Chief Inspector.
Serve as the authorized piping inspector for determining that the requirements of API 570 on inspection, examination and testing are met.
Ensure that Personnel performing nondestructive examinations shall meet the qualifications defined in API 510,570.
Required to work on site.
Other duties as assigned by Supervision.
REQUIRED QUALIFICATIONS AND SKILLS:
2 years experience in weld inspection related activities (QC, NDT, etc.)
Current American Petroleum Institute (API) API-653, API 510, or API-570 certification; or satisfactory completion of a Visual/Mechanical Inspection training course approved by client (preferred).
Extensive knowledge of industry standards including AWS, ASME, API (510 & 570) a MUST; working knowledge of NDE methodologies also a plus.
Health, Vision, Dental Insurance
Group Life Insurance
Flexible Spending Plan
Enhanced 401K Plan
Education Assistance Plan
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. REC Silicon is an equal opportunity employer.